Vehicle development

Our competencies

Together we develop your projects from the design to being ready to go into production.

From the individual component to developing complete vehicle modules, our range of services during development offers comprehensive support to your operational processes.
This includes design strategies and simulations, support for complete vehicle modules, internal project management, (series) team management, module management, process optimisation and supplier integration, function verification and technical support at any stage of the design process.

You can call on our process advice for any design-related matters at any time during the planning or development phase. In the same way we offer fault analysis and optimisation strategies. We also undertake additional or separate product testing and documentation for you.

Forward looking approaches using lightweight, sustainable materials are proactively supported by our experience in this area.
If you value the ecological value of your projects, we pay special attention to this by accounting for the sustainability of each of your components.

Consider us as part of your team - with full responsibility.

Portfolio

You decide where you need us.
We can take on the entire management of the project and the design, design individual components or focus on optimising individual phases of a process already under way. Even if you are planning small-scale production runs, we are at your side.

Together we will devise an efficient, intelligent and budget-friendly way forward.
Bring your innovative visions to life with us.

Project Involvement of our Teams

BMW 5 (new), 7 (new), 8 (new) CLAR WE serial development

  • Floor covering
  • Sound insulation interior
  • Injection molding
Along the whole production line we are awarded for design and project management of above mentioned components including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production.

BMW 5 (new), 7 (new), 8 (new) CLAR WE

  • SE team management for modul IA
  • Concept development for lower fittings
We accompany the project from first early mile stones until few months after start of serial production. During this time our team is responsible for all concepts and components and will be the communication partner for all involved parties.

BMW diverse electric vehicles

Design and project management for:
  • Charging sockets and covers for charging infrastructure
  • Resident engineers' work

BMW iNext

Design and project management for:
  • Modul IA (complete)

LG / LK

  • Implementation of 48V system

BMW 3 (G26)

Design and project management for:
  • Floor covering
  • Sound insulation interior
Along the whole production line we are awarded for design and project management of above mentioned components including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production.

BMW 3 (G20,G21,G28)

Design and project management for:
  • Sound insulation interior
  • Sound insulation trunk
  • Sound insulation bulkhead
Along the whole production line we are awarded for design and project management of above mentioned components including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production.

BMW Z4 / Toyota Supra (G29/J29)

Design and project management for:
  • Injection molding for upper/ lower fittings, trunk
Along the whole production line we are awarded for design and project management of above mentioned components including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production.

BMW 6 (G14, G15, G16)

Design and project management for:
  • Injection molding for upper/ lower fittings, trunk
  • Sound insulation for A-pillar
  • Floor mats
Along the whole production line we are awarded for design and project management of above mentioned components including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production.

BMW Mini (F60)

Design and project management for:
  • Injection molding for upper fittings
Along the whole production line we are awarded for design and project management of above mentioned components including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production.

BMW 8 (G14, G15, G16)

Design and project management for:
  • Concept works for EPP seat-back
Along the whole production line we are awarded for design and project management of above mentioned components including concept design works and final CAD design of components.

BMW 1 (F40)

Design and project management for:
  • Injection molding for upper/ lower fittings
  • Sound insulation bulkhead
Along the whole production line we are awarded for design and project management of above mentioned components including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production.

BMW G01, G05, G06, G07, G08

Design and project management for:
  • Sound insulation bulkhead
  • Floor panelling
  • Sound instulation interior
  • Floor mats
  • EPP inserts, EPP trunk
Along the whole production line we are awarded for design and project management of above mentioned components including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production.

BMW 4 (35up)

Design and project management for:
  • Syntak engine encapsulation
For our partners and series components' suppliers we are awarded for design and project management at BMW site of above mentioned components including concept design works and final CAD design of components.

BMW G11/G12, G30/G31/G32, F12/F13/F06

Design for:
  • Sound instulation interior
  • Foam components front seat, rear seat
  • Injection molding for upper/ lower fittings, trunk
  • Floor mats and engine encapsulation
For our partners and series components' suppliers we are awarded for design and project management at BMW site of above mentioned components including concept design works and final CAD design of components.

BMW F52

Design and project management for:
  • Lower fittings (floor panelling, heating channels, inserts)
For diverse vehicles of this production line we are awarded for design and project management of above mentioned components including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production.

BMW i8

SE team management for:
  • Lower fittings and sound insulations interior
  • Sound insulations engine compartment
We accompany the project from first early mile stones until few months after start of serial production. During this time our team is responsible for all concepts and components and will be the communication partner fort he series development team.

Rolls Royce

Design and project management for:
  • Lower fittings (floor panelling, heating channels, cover strips entry, sound insulations interior and inserts)
  • Trunk coverings
  • Sound insulations engine compartment
For the concept phase of the vehicle we are awarded for design and project management of above mentioned components including communication regarding installation space, concept design works and final CAD design of components.

BMW E82-E (electric vehicle)

Design and project management for:
  • Lower fittings (floor panelling, battery covers)
For the E82-E we are awarded for design and project management of above mentioned components including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production.

BMW E72

Design and project management for:
  • Equipment carrier trunk
For the E72 we are awarded for design and project management of the equipment carrier including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production.

BMW 1 (F20), 3 (F30)

Design and project management for:
  • Lower fittings (floor panelling, heating channels and inserts)
Along the whole production line we are awarded for design and project management of above mentioned components including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production.

BMW 7 (F01), 6 (F12, F13), 5 (F10)

Design and project management for:
  • Lower fittings (floor panelling, heating channels, cover strips entry and inserts)
Along the whole production line we are awarded for design and project management of above mentioned components including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production.

BMW 1 (E87, E81, E82, E88), 3 (E90, E91, E92, E93)

Design and project management for:
  • Lower fittings (floor panelling and inserts)
Along the whole production line we are awarded for design and project management of above mentioned components including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production.

BMW Gxx (B48, B58, B47, B57, N63, S63, B37, B38, B48 PHEV)

Design and project management for:
  • Engine encapsulations (corrosion protection, capsule ZK front, acoustic foam ZKH, Syntak cylinder crank case, Syntak cylinder head, capsule ZKG cold side, transmission capsule, cover top rear, capsule ZKG hot side, capsule ZKH hot side)
Along the whole production line we are awarded for design and project management of above mentioned components including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production.

BMW NES/New Entry Sedan (F52)

Design and project management for:
  • Sound insulations interior, engine compartment and trunk
For the F52 we are awarded for design and project management of the equipment carrier including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production.

BMW 7/7 long (G11/12)

Design and project management for:
  • Sound insulations interior
For the G11/12 we are awarded for design and project management of the equipment carrier including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production.

BMW 5 long China (G38)

Design and project management for:
  • Sound insulations interior
  • Trunk coverings
For the G38 we are awarded for design and project management of the equipment carrier including communication regarding installation space, concept design works and final CAD design of components. We accompany the projects from first early mile stones until start of series production (from BBG in cooperation with a development partner located in China).
powered by webEdition CMS